Download Catalog
Dry Bath Incubator BZBI-609 is a microprocessor-controlled dry block heater with an LCD display and an interface. It undergoes a precise temperature control range of RT.+5℃ to 100℃ high stability, and the four groups' timing is either independent or synchronous. The interface has two temperature and time groups that can be adjusted to be independent or simultaneous. Customized aluminum blocks are available in a variety of shapes and sizes. It features an automated preheating function, auto restart after a power outage, automatic running, temperature calibration built-in, and overheat protection.
| Temperature Setting Range | 0℃ to 100℃ |
|---|---|
| Temperature Control Range | RT.+5℃ to 100℃ |
| Timing Range | 1min to 99h59min/∞ |
| Temperature Accuracy | ≤±0.3℃ (at 37℃) |
| Display Accuracy | 0.1℃ |
| Temperature Uniformity | ≤±0.3℃ (at 37℃) |
| Heating Time | ≤15min (from 25℃ to 100℃) |
| Auto Heating | Yes |
| Auto Running | Yes |
| Auto Resume to Run | Yes |
| Temperature Control Group | 2 |
| Block Quantity | 4 |
| Power | 240 W |
| Voltage | AC 110 V or AC 220 V/ 50-60 Hz |
| Fuse | 250 V; 3A Ф5×20 |
| Dimension(mm) | 370×254×217 |
| Weight(kg) | 5 |
It undergoes accurate temperature control with high stability
The timing is either independent or simultaneous with the four groups
It is a micro-processor-controlled dry block heating system with highly precise temperature control
Different kinds of aluminum blocks are available which can be customized
It is equipped with an LCD display and a simple interface
The interface realizes two groups of temperature and timing that are set either independently or simultaneously
It is easy to set up and use
It is equipped with an automatic preheating function, auto-resume to run after power off, automatic running, built-in temperature calibration, and built-in overheat protection
It can be widely used in the preservation and reactions of the sample, DNA amplification, initial denaturation of electrophoresis, etc.
